Infection Control Standards
Deficiencies: All deficiencies related to Infection Control must be addressed in a corrective action plan.
1) Equipment and work surfaces are appropriately cleaned and decontaminated after contact with blood or other potentially infectious material.
Routine Decontamination:
• Contaminated work surfaces are decontaminated with an appropriate disinfectant (29 CFR 1910.1030)
• Written “housekeeping” schedules have been established and are followed for regular routine daily cleaning
• Staff can identify cleaning and disinfection of surfaces and equipment, the disinfectant used and responsible personnel in between patients use.
2) Routine cleaning and decontamination of equipment/work surfaces is completed according to site-specific written schedule.
Spill Procedure: Personnel can identify procedures for prompt decontamination of blood/body fluid spills, the disinfectant used, and the responsible person(s).
Disinfectant solutions used on site are:
3) Approved by the Environmental Protection Agency (EPA).
4) Effective in killing HIV/HBV/TB.
5) Follow manufacturer instructions.
Disinfectant Products:
• Products used for decontamination have a current EPA-approved status
• Effectiveness in killing HIV/HBV/TB is stated on the manufacturer’s product label
• Decontamination products are used according to manufacturer’s guidelines for decontamination and contact times
10% Bleach Solution:
• 10% bleach solution that is EPA registered and effective against TB, is changed/reconstituted every 24 hours (due to instability of bleach once mixed with water)
• Surface is cleaned prior to disinfecting (due to presence of organic matter (e.g., dirt, blood, excrement) inactivates active ingredient, sodium hypochlorite)
• Surface is air-dried or allowed appropriate time (stated on label) before drying.
• Manufacturer’s directions, specific to every bleach product, are followed carefully
Note: “Contamination” means the presence or reasonably anticipated presence of blood or OPIM on any item or surface. “Decontamination” is the use of appropriate physical or chemical means to remove, inactivate or destroy bloodborne pathogens so that a surface or item is no longer capable of transmitting infectious particles and is rendered safe for handling, use or disposal.
Current EPA product lists and information is available from the EPA, Antimicrobial Division at (703) 305-1284, or at www.epa.gov/oppad001/chemregindex.htm\